手術室硬件配置4個常見注意點
隨著醫療新技術和新的手術工具的不斷涌現，帶動了手術量的迅猛上升，而且
手術室是醫學技術與工程技術結合的產物，下面來講講
手術室建設要求以及手術室感染控制原則是怎樣的？
With the continuous emergence of new medical technologies and new surgical tools, the number of operations has increased rapidly. Moreover, the operating room is the product of the combination of medical technology and engineering technology. What are the requirements of the operating room and the principles of infection control in the operating room?
手術室的要求
Operating room requirements
手術室是醫院中無菌潔凈要求很嚴格的地方之一，手術室的建設、布局、工作流程和治理都是圍繞無菌要求設計的。
The operating room is one of the places in the hospital with strict aseptic and clean requirements. The construction, layout, work flow and management of the operating room are designed around the aseptic requirements.
手術室又是醫療設備密集的科室，除手術床、無影燈外，麻醉機、監護、電刀以及自體血回收機、
手術顯微鏡、影像系統等已成為手術常用設備。隨著技術的發展，新的手術工具不斷涌現，如各類軟硬內窺鏡下手術、導航設備、立體定位系統、
手術機器人等微創手術輔助設備等，如此眾多的設備擁擠在手術室內，對設備布局、安裝、配電及用電安全提出了更高的要求。
The operating room is also a department with dense medical equipment. In addition to the operating table and shadowless lamp, anesthesia machine, monitoring, electric knife, autologous blood recovery machine, operating microscope and imaging system have become common equipment for surgery. With the development of technology, new surgical tools are constantly emerging, such as various soft and hard endoscopic surgery, navigation equipment, stereo positioning system, surgical robot and other minimally invasive surgical auxiliary equipment. So many equipment are crowded in the operating room, which puts forward higher requirements for equipment layout, installation, power distribution and power safety.
另外，現在各家醫院分散建設的導管室、膀胱鏡室等，有些也是參照手術室要求建立起來的準手術室。尤其是開展參與治療的導管室，基本上是嚴格按照手術室的規范治理和使用，這些科室廣義上說也是擴展的手術室。這些準手術室在老醫院都是見縫插針式地建設，新建醫院應該綜合考慮這些科室與常規手術室間的布局安排。
In addition, some of the catheter rooms and cystoscopy rooms scattered in various hospitals are also quasi operating rooms established according to the requirements of operating rooms. In particular, the catheter rooms involved in the treatment are basically managed and used in strict accordance with the specifications of the operating room. In a broad sense, these departments are also expanded operating rooms. These quasi operating rooms are built in the old hospital in a timely manner. The new hospital should comprehensively consider the layout between these departments and the conventional operating rooms.
Principles of infection control in operating room
防止和降低手術感染是手術室建設很基本的要求，感染控制的方法有：
Preventing and reducing surgical infection is a very basic requirement for the construction of the operating room. The methods of infection control include:
(1)通過術前備皮和術中對非手術區域的無菌覆蓋，減少患者自身感染；(2)對手術用具和物品的嚴格消毒或隔離，減少外源接觸感染；(3)降低空氣中的灰塵和微生物粒子，減少懸浮污染物的擴散感染；(4)使用抗生素。這是一種補救措施，其靠藥物往控制已發生的感染。
(1) Through preoperative skin preparation and aseptic coverage of non-surgical areas during the operation, the patient's self infection can be reduced; (2) Strictly disinfect or isolate surgical instruments and articles to reduce external contact infection; (3) Reduce the dust and microbial particles in the air and reduce the diffusion and infection of suspended pollutants; (4) Use antibiotics. This is a remedial measure that relies on drugs to control the infection that has occurred.
我國目前普遍存在的題目是，只注重預防感染結果，而忽略了對感染的全過程控制。臨床表現是依靠大量抗生素來減少術后感染率，而對手術無菌過程缺乏嚴格控制。
At present, the common problem in our country is that we only pay attention to the prevention of infection results and neglect the whole process control of infection. The clinical manifestation is to rely on a large number of antibiotics to reduce the postoperative infection rate, while the aseptic process of the operation lacks strict control.
為減少抗生素的濫用，必須進步手術室潔凈水平，嚴格無菌操縱和治理，加強對整個手術過程的控制，切斷所有可能的污染途徑(包括空氣)，阻止細菌接觸手術創口進進人體。
In order to reduce the abuse of antibiotics, it is necessary to improve the cleanliness level of the operating room, strictly control the aseptic operation and treatment, strengthen the control of the whole operation process, cut off all possible pollution channels (including air), and prevent bacteria from contacting the surgical wound and entering the human body.
（SIMCO）FMX-004靜電測試儀
SIMCO靜電測試儀FMX-004
FMX-004是一款搭載單芯片計算機的多機能數字測試儀，手掌大小的緊湊設計采用容易看的大LCD顯示，最大±30kV(測定距離：25mm)，用于簡單的帶電測定，靜電發生場所特定的帶電水平調查，靜電應對的方案、效果的測定，維持管理等。
特點
3種檢測方法
根據MODE按鍵的轉換選擇測定范圍
靜電連續測定
離子平衡連續測定和數據記錄可能。
測定結果畫面表示和記錄一體記憶
制品的除電狀態確認記錄。
FMX-004本體：可連續30小時測試
離子平衡測定
離子平衡測定方式根據防靜電器的性能確認
±300V的電位測定是各種除靜電器最適度的保養。離子平衡板不使用時，從本體后面裝上保管
產品規格
|
型號
|
FMX-004
|
|
測定范圍
|
AUTOMODE [Au]
0 -±1.49kV(Lo范圍)
±1.0kV - ±30.0kV(Hi范圍)
?Low MODE[Lo]
0 -±3.00kV
?Hi MODE[Hi]
0 -±30.0kV
?Ion balance voltagemeasuring mode[Ib]
?0 - ±300V
[MODE]按鈕順次切換可實現方式的轉換
切換時表示
[Au]→[Hi]→[Lo]→[IB]依次切換
|
|
測定距離
|
25mm ±0.5mm
|
|
應答速度
|
1秒以內
|
|
抽樣速度
|
5次/秒
|
|
測定精度
|
±10%
|
|
操作環境
|
0℃ -40℃， 0 -60％ R.H.
|
|
表示
|
廣域LCD表示
數字?jǐn)?shù)值和圖表表示
圖表表示：電壓、輔助刻度
右側（+）紅色LCD燈亮
左側（-）藍色LCD燈亮
|
|
帶電測試方法
自動方式(AUTO MODE)
Lo：±0.1kV(0 - ±1.49kV)
Hi：±2.0kV(±1.5kV - ±30.0kV)
LOW方式(LowMODE)
±0.2kV
Hi方式(HI MODE)
±2.0kV
離子平衡方式(Ionbalance ismeasured)
±20V
|
|
數字式數值表示：
3位數表示自動范圍切換
帶電電位測定AUTO：
□.□□kV ⇒ 0.00 -±1.49kV(LOW range)
□□.□kV ⇒ ±1.0kV -±30.0kV(Hi range)
Lo：
□.□□kV ⇒ 0.00 -±3.00kV(Low Mode)
Hi：
□□.□kV ⇒ 0- ±30.0kV(HiMode)
□□□V ⇒ 0 -±300V(Ionbalance)
離子平衡電位測定
□□□V ⇒ 0- ±300V(Ionbalance)
|
|
形式表示
Au：AUTO Mode
Hi：HI range mode
Lo：LOW range mode
Ib：Ionbalance Mode
|
|
[HOLD]：手動動作表示
電池電量表示：蓄電池殘留量分4階段表示
|
|
聲音
|
電源操作時會有嘩嘩聲
|
|
電源自動關閉
|
約5分鐘的使用時間電源會自動中斷
電源ON時、「POWER」按鈕按3秒，該機能便停止。（電池可連續測定）
|
|
手動機能
|
測定時按壓「HOLD」按鈕、數字式數値?數碼零便固定，但是一次按壓就能恢復正常測定。
|
|
ＬＥＤ照明
|
無
|
|
模擬輸出
|
AUTOMODE
0 - ±3.0V(0 -30.0kV)
?Low MODE
0 -±3.0V(0 - ±3.00kV)
?Hi MODE
0 -±3.0V(0 - ±30.0kV)
?Ion balance voltagemeasuring range
0 - ±3.0V(0 -±300V)
|
|
電源
|
9V干電池(006P)1個、最大動作時間：約30小時
|
|
外形寸法
|
本體：115mm(L) x 73mm(W)x 25mm(H)
離子平衡板： 123mm(L)x 73mm(W) x 25mm(H)
|
|
重量
|
140g含電池
170g電池、含離子平衡板
|
|
外殼材質
|
導電性ABS樹脂(灰色)
|
|
選購
|
模擬輸出電纜?固定用支架套
|
